corsair-frame-5000d-wood-rs-modular-mid-tower-pc-case-white-oak
Corsair FRAME 5000D WOOD RS Modular Mid-Tower PC Case - White/Oak / FSC-Certified Solid Oak Front Panel / 2x RS200 200mm and 1x RS140 140mm PWM Fans Included / 450mm GPU Clearance / Triple 420mm Radiator Support / RapidRoute 2.0 Cable Management / CC-9011354-WW
1 Year Local Warranty
Model No : CORSAIR CC-9011354-WW
Price Inc. Vat
R 3,199
Save R 400.00
ListR 3,599
3199Change Quantity:
In Stock with Evetech
Corsair FRAME 5000D WOOD RS Case - White/Oak
FSC-Certified Wood From One Solid Piece
The front panel uses FSC-certified oak from responsibly managed forests, cut from a single solid piece so the grain runs consistently across the face rather than being joined from offcuts. The slats are spaced for airflow, which keeps the panel functional as an intake rather than only decorative.
FSC-Certified Wood From One Solid Piece
The front panel uses FSC-certified oak from responsibly managed forests, cut from a single solid piece so the grain runs consistently across the face rather than being joined from offcuts. The slats are spaced for airflow, which keeps the panel functional as an intake rather than only decorative.
Three 420mm Radiator Mounting Positions
Radiator support runs to 420mm across three locations in the front, roof and side, and the roof also accepts 360mm, 280mm and 240mm sizes. Up to ten 140mm fans can be mounted at once, which allows a large custom loop or several all-in-one coolers in the same build.
Three 420mm Radiator Mounting Positions
Radiator support runs to 420mm across three locations in the front, roof and side, and the roof also accepts 360mm, 280mm and 240mm sizes. Up to ten 140mm fans can be mounted at once, which allows a large custom loop or several all-in-one coolers in the same build.
Two 200mm Fans Fitted As Intake
Two 200mm fans arrive pre-installed behind the wood front panel. Larger blades move the same volume of air at a lower rotational speed than a bank of 120mm fans, so the baseline airflow through the chassis is high without the noise that smaller, faster fans generate.
Two 200mm Fans Fitted As Intake
Two 200mm fans arrive pre-installed behind the wood front panel. Larger blades move the same volume of air at a lower rotational speed than a bank of 120mm fans, so the baseline airflow through the chassis is high without the noise that smaller, faster fans generate.
A Full-Length Tempered Glass Side Panel
The side panel is a single full-length sheet of tempered glass with no crossbar interrupting it, so the whole interior including the power supply area is visible. That makes the cable routing and component layout part of the finished look rather than something hidden behind a shroud.
A Full-Length Tempered Glass Side Panel
The side panel is a single full-length sheet of tempered glass with no crossbar interrupting it, so the whole interior including the power supply area is visible. That makes the cable routing and component layout part of the finished look rather than something hidden behind a shroud.
InfiniRail Slides Fans Where You Want Them
The InfiniRail system mounts fans on a sliding rail rather than at fixed screw holes, taking sizes from 120mm to 200mm at any position along its length. That allows fans to be moved clear of a radiator, a tall memory kit or an oversized graphics card while building.
InfiniRail Slides Fans Where You Want Them
The InfiniRail system mounts fans on a sliding rail rather than at fixed screw holes, taking sizes from 120mm to 200mm at any position along its length. That allows fans to be moved clear of a radiator, a tall memory kit or an oversized graphics card while building.
Front I/O With Three USB Type-C Ports
The front panel carries one USB 3.2 Gen 2x2 Type-C port at 20Gb/s alongside two USB 3.2 Gen 1 Type-C ports and a combination audio jack. An all Type-C panel suits current phones, controllers and portable drives without an adapter on every connection.
Front I/O With Three USB Type-C Ports
The front panel carries one USB 3.2 Gen 2x2 Type-C port at 20Gb/s alongside two USB 3.2 Gen 1 Type-C ports and a combination audio jack. An all Type-C panel suits current phones, controllers and portable drives without an adapter on every connection.
Built For Reverse-Connector Motherboards
The chassis is cut for reverse-connector boards including ASUS BTF, MSI Project Zero and GIGABYTE Project Stealth, with matching cutouts and tie-down points. With every header on the rear of the board, the view through the full-length glass carries no visible cabling at all.
Built For Reverse-Connector Motherboards
The chassis is cut for reverse-connector boards including ASUS BTF, MSI Project Zero and GIGABYTE Project Stealth, with matching cutouts and tie-down points. With every header on the rear of the board, the view through the full-length glass carries no visible cabling at all.
450mm Of Card Room And E-ATX Support
Graphics cards up to 450mm fit, or 425mm with front fans installed, and the board tray takes Mini-ITX, MicroATX, ATX and E-ATX up to 305mm by 277mm. Expansion is seven horizontal slots or three vertical, with CPU air coolers up to 175mm tall supported.
450mm Of Card Room And E-ATX Support
Graphics cards up to 450mm fit, or 425mm with front fans installed, and the board tray takes Mini-ITX, MicroATX, ATX and E-ATX up to 305mm by 277mm. Expansion is seven horizontal slots or three vertical, with CPU air coolers up to 175mm tall supported.
A 542mm Chassis In Steel, Glass And Wood
The case measures 542mm tall, 556mm long and 250mm wide and weighs 16.24kg empty, built from steel, solid wood, tempered glass and plastic. Compatible all-in-one coolers run through the H100, H115, H150, NAUTILUS, TITAN, TITAN II and TITAN ULTRA ranges on a standard ATX supply.
A 542mm Chassis In Steel, Glass And Wood
The case measures 542mm tall, 556mm long and 250mm wide and weighs 16.24kg empty, built from steel, solid wood, tempered glass and plastic. Compatible all-in-one coolers run through the H100, H115, H150, NAUTILUS, TITAN, TITAN II and TITAN ULTRA ranges on a standard ATX supply.
FAQ
Frequently Asked Questions
Everything you need to know about this product
It uses FSC-certified oak from responsibly managed forests, cut from a single solid piece for a consistent grain.
It clears graphics cards up to 450mm, or 425mm when front fans are installed.
It supports 420mm radiators in three positions, and the roof also accepts 360mm, 280mm and 240mm sizes.
Two 200mm fans are pre-installed as intake behind the wood front panel.
The chassis takes up to ten 140mm fans mounted simultaneously across its positions.
There is one USB 3.2 Gen 2x2 Type-C port and two USB 3.2 Gen 1 Type-C ports, plus a combination audio jack.
Yes, it accepts Mini-ITX, MicroATX, ATX and E-ATX boards up to 305mm by 277mm.
It measures 542mm by 556mm by 250mm and weighs 16.24kg before components are fitted.
The chassis clears CPU air coolers up to 175mm in height.
Yes, it is built for ASUS BTF, MSI Project Zero and GIGABYTE Project Stealth boards.
AI-Generated Content:These FAQs are generated by an automated AI system and may contain inaccuracies or omissions. Evetech makes no warranties, express or implied, regarding their completeness or reliability. For definitive information, please refer to the manufacturer's official specifications.
Please Note: Product images are for illustrative purposes only and may differ from the actual product.
Choose your
own PC
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderPrice Inc. Vat
R 3,199
Save R 400.00
ListR 3,599
3199Change Quantity:
In Stock with Evetech
Choose your
own PC
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderCorsair FRAME 5000D WOOD RS Modular Mid-Tower PC Case
