Trusted Partners

Elegoo PLA Matte is a 1.75mm PLA filament with a matte surface that diffuses light and reduces visible layer lines. This Matte Black spool holds 1kg on a cardboard spool, with a dimensional accuracy of +/-0.02mm. It prints at 190 to 230C and suits most FDM printers.
Elegoo PLA Matte is a 1.75mm PLA filament with a matte surface that diffuses light and reduces visible layer lines. This Matte Black spool holds 1kg on a cardboard spool, with a dimensional accuracy of +/-0.02mm. It prints at 190 to 230C and suits most FDM printers.

The spool is 1kg of Matte Black PLA on a cardboard spool that weighs about 154g empty. Elegoo ships it dried and vacuum-sealed with desiccant, and describes the spool as eco-friendly.

The spool is 1kg of Matte Black PLA on a cardboard spool that weighs about 154g empty. Elegoo ships it dried and vacuum-sealed with desiccant, and describes the spool as eco-friendly.

Elegoo describes a frosted texture that diffuses light, for a low gloss, smooth finish and a uniform, refined look. The picture shows the matte range printed in several colours, of which this spool is the black.
Elegoo describes a frosted texture that diffuses light, for a low gloss, smooth finish and a uniform, refined look. The picture shows the matte range printed in several colours, of which this spool is the black.


Elegoo lists a dimensional accuracy of +/-0.02mm on the 1.75mm filament, and says each spool is dried and vacuum-sealed to avoid clogging and bubbles. Elegoo's own icons call out no clogging, no tangle and less clumping.

Elegoo lists a dimensional accuracy of +/-0.02mm on the 1.75mm filament, and says each spool is dried and vacuum-sealed to avoid clogging and bubbles. Elegoo's own icons call out no clogging, no tangle and less clumping.

Each cardboard spool is neatly wound and inspected by hand to limit tangles and feeding problems. The picture shows spools of the matte range side by side, including black.
Each cardboard spool is neatly wound and inspected by hand to limit tangles and feeding problems. The picture shows spools of the matte range side by side, including black.

Elegoo lists a nozzle temperature of 190 to 230C and a bed temperature of 35 to 65C, with no enclosure or build plate glue required and a nozzle of 0.2mm or larger. It recommends drying before use at 50C for 8 hours, and keeping humidity at or under 20% RH.
Elegoo lists a nozzle temperature of 190 to 230C and a bed temperature of 35 to 65C, with no enclosure or build plate glue required and a nozzle of 0.2mm or larger. It recommends drying before use at 50C for 8 hours, and keeping humidity at or under 20% RH.
Everything you need to know about this product
A 1.75mm PLA filament with a matte surface that diffuses light and reduces visible layer lines.
1kg of filament on a cardboard spool. The empty spool weighs about 154g.
Nozzle 190 to 230C and bed 35 to 65C, according to Elegoo. Chamber temperature is listed as 20 to 45C and an enclosure is not required.
Elegoo lists a dimensional accuracy of +/-0.02mm on the 1.75mm filament.
It ships dried and vacuum-sealed with desiccant. Elegoo still recommends drying before use, at 50C for 8 hours, and keeping humidity at or under 20% RH.
Elegoo lists most FDM printers that take 1.75mm filament, without naming models.
A 0.2mm nozzle or larger.
No. This is the cardboard spool version. Elegoo sells a reusable-spool version as a separate product.
AI-Generated Content: These FAQs are generated by an automated AI system and may contain inaccuracies or omissions. Evetech makes no warranties, express or implied, regarding their completeness or reliability. For definitive information, please refer to the manufacturer's official specifications.





Please Note: Product images are for illustrative purposes only and may differ from the actual product.
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderElegoo PLA Matte 3D Printer Filament 1.75mm 1kg
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builder