GOVEE Table Lamp 2 Pro (Sound by JBL) / RGBIC Smart Table Lamp with Built-in JBL Speaker / 210 High-Density LEDs / 16 Music Sync Modes with 32ms Response / Stereo Pairing & Music DreamView Support / 5200mAh Rechargeable Battery / 600lm Brightness & 2700K–6500K Tunable White / Matter, Alexa & Google Assistant Compatible / App Control via WiFi + Bluetooth / H60200F1

The Govee Table Lamp 2 Pro puts a 210-bead RGBIC light and a 2.5-inch full-range JBL speaker in one cordless unit. It runs from a 5200mAh battery, tunes white between 2700K and 6500K, and reaches up to 600 lumens. Control is through the Govee app over Wi-Fi or Bluetooth, with Matter, Alexa and Google Assistant supported.

The lamp listens to what is playing and drives the lighting from it across 16 music modes. Govee rates the response at 32 milliseconds, which is what keeps the colour changes sitting on the beat rather than trailing behind it. The modes run from gentle ambient shifts through to hard party flashes.

Matter compatibility lets the lamp join a smart-home setup directly and take voice commands for on, off, brightness and colour. Alexa and Google Assistant are both supported. The Govee app covers scheduling and scene building when you would rather set it once and leave it alone.

Audio comes from a single 2.5-inch full-range driver running JBL's equaliser algorithm, with a rated maximum output of 10 watts. It connects over Bluetooth or Wi-Fi. That suits a bedside table, a desk or a patio table rather than filling a whole room with sound.

The box holds the table lamp, a power adapter and a user manual. The base measures 7.44 by 7.44 inches and the lamp stands 13.38 inches tall. Nothing further is needed to run it, because the battery is built in rather than user-supplied.

A 5200mAh cell drives the light and the speaker together for a rated 4.5 hours. Govee measures that figure with Bluetooth playback at 50 percent volume and 50 percent brightness in music mode, so quieter or dimmer settings stretch it further. Real figures move with how you actually use it.

The Table Lamp 2 Pro is shaped as a centrepiece rather than a corner light, with the glow readable from every side. In music mode the lighting tracks whatever is playing while the speaker carries it. Running on battery means there is no cable to route across the table.

Because the lamp holds its own battery it can be lifted off the shelf and taken out to a patio table for the evening, then brought back to charge. There is no cable to run and no socket to sit near. Note that no ingress protection rating is published for it, so keep it out of rain and away from poolside splashes.

Two units link over a 5.8GHz Wi-Fi connection and split the channels for stereo playback. The lighting stays in step across both at the same time. This is the arrangement to use when you want the sound spread across a room rather than coming from a single point.

RGBIC means the bead array is addressable in zones rather than lit as one flat colour, so a single lamp can hold a gradient across its height. There are 210 beads in the array. That density is what keeps the blend smooth instead of showing separate points of light.

Past the colour effects the lamp covers the usable white range, from 2700K warm for evenings through to 6500K daylight for working. Peak output is 600 lumens. That span is why it holds up as a task light as well as a mood light.