
Trusted Partners
The TP-Link Archer MR402 is an AC1200 dual-band 4G LTE router with a built-in nano SIM slot. Insert a nano SIM card, switch it on and it shares a 4G connection with download speeds of up to 150Mbps, over Wi-Fi at up to 867Mbps on 5GHz and 300Mbps on 2.4GHz. TP-Link rates it for up to 64 Wi-Fi devices.
The TP-Link Archer MR402 is an AC1200 dual-band 4G LTE router with a built-in nano SIM slot. Insert a nano SIM card, switch it on and it shares a 4G connection with download speeds of up to 150Mbps, over Wi-Fi at up to 867Mbps on 5GHz and 300Mbps on 2.4GHz. TP-Link rates it for up to 64 Wi-Fi devices.

The nano SIM card slot sits on the back of the router. Insert the SIM and switch the router on; TP-Link says no configuration is needed. A built-in 4G LTE modem then shares the mobile connection, and TP-Link lists support for both FDD-LTE and TDD-LTE bands. Check the listed bands against the bands your network uses.

The nano SIM card slot sits on the back of the router. Insert the SIM and switch the router on; TP-Link says no configuration is needed. A built-in 4G LTE modem then shares the mobile connection, and TP-Link lists support for both FDD-LTE and TDD-LTE bands. Check the listed bands against the bands your network uses.

The back carries three 10/100Mbps LAN ports, one 10/100Mbps LAN/WAN port, the power input, the WPS/Wi-Fi and reset buttons and the SIM slot. The two external 4G LTE antennas fit on SMA-F connectors and can be removed. The router runs from a 12V/1A external power supply.
The back carries three 10/100Mbps LAN ports, one 10/100Mbps LAN/WAN port, the power input, the WPS/Wi-Fi and reset buttons and the SIM slot. The two external 4G LTE antennas fit on SMA-F connectors and can be removed. The router runs from a 12V/1A external power supply.


Connect a cable, fibre or DSL modem to the LAN/WAN port and the Archer MR402 works as a normal Wi-Fi router. The 3G/4G connection then acts as a failover backup if the wired line drops. WAN types include dynamic IP, static IP, PPPoE, PPTP and L2TP.

Connect a cable, fibre or DSL modem to the LAN/WAN port and the Archer MR402 works as a normal Wi-Fi router. The 3G/4G connection then acts as a failover backup if the wired line drops. WAN types include dynamic IP, static IP, PPPoE, PPTP and L2TP.

Wi-Fi runs at up to 867Mbps on 5GHz and 300Mbps on 2.4GHz as maximum rates, with TP-Link rating it for up to 64 devices at once. Each band has its own guest network, parental controls set time limits and content filters, and QoS prioritises traffic by device or application.
Wi-Fi runs at up to 867Mbps on 5GHz and 300Mbps on 2.4GHz as maximum rates, with TP-Link rating it for up to 64 devices at once. Each band has its own guest network, parental controls set time limits and content filters, and QoS prioritises traffic by device or application.


The Archer MR402 works with TP-Link OneMesh range extenders and powerline adapters, sold separately, to build a mesh network under one Wi-Fi name. Set it up from the web interface or the TP-Link Tether app. The box holds the router, an RJ45 Ethernet cable, a power adapter and a quick installation guide.

The Archer MR402 works with TP-Link OneMesh range extenders and powerline adapters, sold separately, to build a mesh network under one Wi-Fi name. Set it up from the web interface or the TP-Link Tether app. The box holds the router, an RJ45 Ethernet cable, a power adapter and a quick installation guide.
Everything you need to know about this product
Yes. It has one nano SIM card slot and a built-in 4G LTE modem. Insert a nano SIM, switch it on and it shares the mobile connection over Wi-Fi and its Ethernet ports.
Up to 150Mbps download on 4G LTE, as TP-Link rates it. Your real speed depends on your network, the signal where the router stands and your SIM plan.
FDD-LTE B1/B3/B5/B7/B8/B20/B28 and TDD-LTE B38/B40/B41 on 4G, plus HSPA/UMTS B1/B5/B8 on 3G, as TP-Link lists them. Check these against the bands your mobile network uses where you live.
Up to 867Mbps on 5GHz and 300Mbps on 2.4GHz (AC1200), as maximum rates. TP-Link rates it for up to 64 Wi-Fi devices at the same time.
Yes. Plug a cable, fibre or DSL modem into its LAN/WAN port and it works as a wireless router. The 3G/4G connection can then act as a failover backup.
Yes. The two external 4G LTE antennas are detachable and fit on SMA-F connectors.
No. All four ports are 10/100Mbps: three LAN ports and one LAN/WAN port.
Yes, TP-Link OneMesh. It works with OneMesh range extenders and powerline adapters, sold separately, to give one Wi-Fi name across the home.
AI-Generated Content: These FAQs are generated by an automated AI system and may contain inaccuracies or omissions. Evetech makes no warranties, express or implied, regarding their completeness or reliability. For definitive information, please refer to the manufacturer's official specifications.









Please Note: Product images are for illustrative purposes only and may differ from the actual product.
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderTP-Link Archer MR402 AC1200 Dual-Band 4G LTE Router
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builder