
Trusted Partners
The TP-Link TL-SG1005P-PD is a 5-port Gigabit desktop switch with no power adapter. Port 5 takes PoE++ in from a PoE switch or injector, and ports 1 to 4 pass PoE+ out, so it works where there is no plug point.
The TP-Link TL-SG1005P-PD is a 5-port Gigabit desktop switch with no power adapter. Port 5 takes PoE++ in from a PoE switch or injector, and ports 1 to 4 pass PoE+ out, so it works where there is no plug point.

The front panel marks port 5 as PoE IN and ports 1 to 4 as PoE OUT, with the Extend and Recovery switches beside them.

The front panel marks port 5 as PoE IN and ports 1 to 4 as PoE OUT, with the Extend and Recovery switches beside them.

TP-Link's diagram shows the chain: a PoE++ injector feeds port 5, and the switch powers an IP camera from its PoE out ports, with no extra DC adapter anywhere.
TP-Link's diagram shows the chain: a PoE++ injector feeds port 5, and the switch powers an IP camera from its PoE out ports, with no extra DC adapter anywhere.


The PoE budget depends on what comes in: 66W from a 90W source, 47W from 60W, 21W from 30W and 9W from 15.4W, shared across the four PoE+ ports at up to 30W each.

The PoE budget depends on what comes in: 66W from a 90W source, 47W from 60W, 21W from 30W and 9W from 15.4W, shared across the four PoE+ ports at up to 30W each.

Extend mode runs ports 1 and 2 up to 250m for power and data at 10Mbps, and Recovery mode reboots a powered device on ports 1 to 4 that stops responding.
Extend mode runs ports 1 and 2 up to 250m for power and data at 10Mbps, and Recovery mode reboots a powered device on ports 1 to 4 that stops responding.


The underside has two keyhole slots for wall mounting. The fanless metal case is 158 x 101 x 25mm and is rated from -30C to 70C.

The underside has two keyhole slots for wall mounting. The fanless metal case is 158 x 101 x 25mm and is rated from -30C to 70C.
Everything you need to know about this product
Only by PoE. Plug a PoE++ (802.3bt), PoE+ or PoE source into port 5 and the switch runs from that cable. It has no AC or DC input and no power adapter in the box.
It depends on the power coming in. From a 90W 802.3bt Type 4 source it gives up to 66W across ports 1 to 4, 47W from 60W Type 3, 21W from 802.3at and 9W from 802.3af. Each port gives up to 30W.
A PoE switch or PoE injector that supplies power on port 5. For the full 66W out, use an 802.3bt Type 4 (90W) source.
Adding PoE devices where there is no plug point, such as cameras on a pole, access points in a ceiling or phones in a meeting room, all fed by one cable from the main switch.
It lets ports 1 and 2 reach up to 250m for power and data, with the speed dropped to 10Mbps, which is enough for most IP cameras.
The switch watches the devices on ports 1 to 4 and reboots one that stops responding by cycling its PoE power.
TP-Link rates it from -30C to 70C, but lists no water or dust rating, so outdoors it needs an enclosure. It is fanless with a metal case and can be wall mounted.
The TL-SG1005P-PD switch and an installation guide. There is no power adapter, because it runs from PoE.
AI-Generated Content: These FAQs are generated by an automated AI system and may contain inaccuracies or omissions. Evetech makes no warranties, express or implied, regarding their completeness or reliability. For definitive information, please refer to the manufacturer's official specifications.














Please Note: Product images are for illustrative purposes only and may differ from the actual product.
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderTP-Link TL-SG1005P-PD 5-Port Gigabit Desktop PoE+ Switch Wit
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builder