Trusted Partners

The TP-Link TL-SG1008P is an 8-port Gigabit desktop switch with PoE+ on ports 1 to 4, for a few IP cameras, access points or VoIP phones. It has a 64W budget with up to 30W per port and needs no setup.
The TP-Link TL-SG1008P is an 8-port Gigabit desktop switch with PoE+ on ports 1 to 4, for a few IP cameras, access points or VoIP phones. It has a 64W budget with up to 30W per port and needs no setup.

TP-Link's panel shows a camera powered and connected through one cable. The PoE ports work with IEEE 802.3af/at devices, up to 64W in total.

TP-Link's panel shows a camera powered and connected through one cable. The PoE ports work with IEEE 802.3af/at devices, up to 64W in total.

The Recovery switch on the front turns on PoE auto recovery for ports 1 to 4: when a camera stops responding, the switch cycles its power to reboot it.
The Recovery switch on the front turns on PoE auto recovery for ports 1 to 4: when a camera stops responding, the switch cycles its power to reboot it.


TP-Link's drawing lists full Gigabit PoE, power overload protection, automatic PD detection and intelligent power management at 64W: over the budget, the lower-priority port is cut first.

TP-Link's drawing lists full Gigabit PoE, power overload protection, automatic PD detection and intelligent power management at 64W: over the budget, the lower-priority port is cut first.

The port side shows ports 1 to 4 marked PoE, ports 5 to 8 for data, and the jack for the 53.5V adapter in the box. The switch is fanless in a 171 x 98 x 27mm metal case.
The port side shows ports 1 to 4 marked PoE, ports 5 to 8 for data, and the jack for the 53.5V adapter in the box. The switch is fanless in a 171 x 98 x 27mm metal case.

Everything you need to know about this product
Four. Ports 1 to 4 give 802.3af/at PoE+, and ports 5 to 8 are normal Gigabit ports for your router, NVR or PCs.
Up to 30W per port and 64W in total. TP-Link notes the budget is a lab figure and real devices can draw differently.
The switch's power management cuts power to the lower-priority port first, so the devices on the lowest port numbers keep running.
It lets ports 1 and 2 reach up to 250m for power and data, with the speed dropped to 10Mbps, which suits most IP cameras on a long cable run.
It watches the devices on ports 1 to 4 and reboots one that stops responding by cycling its PoE power.
No. It is plug and play. The Extend and Recovery modes are switches on the front panel.
Yes, if they take standard 802.3af or 802.3at PoE, which most IP cameras do. Passive-PoE devices are not supported.
The TL-SG1008P switch, its power adapter and an installation guide.
AI-Generated Content: These FAQs are generated by an automated AI system and may contain inaccuracies or omissions. Evetech makes no warranties, express or implied, regarding their completeness or reliability. For definitive information, please refer to the manufacturer's official specifications.









Please Note: Product images are for illustrative purposes only and may differ from the actual product.
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderTP-Link TL-SG1008P 8-Port Gigabit Desktop Switch With 4-Port
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builder