
Trusted Partners
The TP-Link TL-SG1024D is a 24-port Gigabit unmanaged switch. Plug in the cables and the power cord and it runs, with 48Gbps of non-blocking switching capacity and a 35.7Mpps forwarding rate, so every port works at full speed at once.
The TP-Link TL-SG1024D is a 24-port Gigabit unmanaged switch. Plug in the cables and the power cord and it runs, with 48Gbps of non-blocking switching capacity and a 35.7Mpps forwarding rate, so every port works at full speed at once.

The front panel carries the 24 Gigabit ports with link and speed LEDs, and two hardware switches: Isolation Mode separates client traffic on ports 1 to 22, and Loop Prevention watches all 24 ports for cabling loops that would otherwise take the network down.

The front panel carries the 24 Gigabit ports with link and speed LEDs, and two hardware switches: Isolation Mode separates client traffic on ports 1 to 22, and Loop Prevention watches all 24 ports for cabling loops that would otherwise take the network down.

TP-Link ships the TL-SG1024D with rackmount kits and rubber feet, so it sits on a desk or goes into a 19-inch cabinet. It is fanless, measures 294 x 140 x 44mm and takes AC power straight from the power cord.
TP-Link ships the TL-SG1024D with rackmount kits and rubber feet, so it sits on a desk or goes into a 19-inch cabinet. It is fanless, measures 294 x 140 x 44mm and takes AC power straight from the power cord.

The switch adjusts its power use to the link status of each port, and TP-Link rates its maximum draw at 13.62W. IEEE 802.3x flow control keeps large transfers steady between devices.
The switch adjusts its power use to the link status of each port, and TP-Link rates its maximum draw at 13.62W. IEEE 802.3x flow control keeps large transfers steady between devices.
Everything you need to know about this product
No. It is an unmanaged plug-and-play switch: connect it to your router, plug in your devices and power it on. There is no software or web page to configure.
It is a hardware switch that stops the devices on ports 1 to 22 from talking to each other, while they still reach the router. It suits shared spaces such as guest rooms, classrooms or shops.
If someone plugs both ends of a cable into the switch, or creates a loop through another switch, loop prevention detects it and stops it from flooding the network. It works on all 24 ports.
Yes. TP-Link puts rackmount kits in the box, and rubber feet for desktop use. The V11 chassis is 294 x 140 x 44mm.
Yes. It has no fan, so it runs silent. TP-Link rates its maximum power draw at 13.62W.
No. It is unmanaged, with no VLAN or QoS settings. For VLANs, QoS and IGMP snooping on 24 ports, look at the TL-SG1024DE Easy Smart switch.
All 24 ports are 10/100/1000Mbps Gigabit RJ45 with auto negotiation and auto MDI/MDIX, so any straight or crossover cable works.
The TL-SG1024D switch, a power cord, an installation guide, rackmount kits and rubber feet.
AI-Generated Content: These FAQs are generated by an automated AI system and may contain inaccuracies or omissions. Evetech makes no warranties, express or implied, regarding their completeness or reliability. For definitive information, please refer to the manufacturer's official specifications.



Please Note: Product images are for illustrative purposes only and may differ from the actual product.
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderTP-Link TL-SG1024D 24-Port Gigabit Desktop/Rackmount Switch
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builder