Trusted Partners

The TP-Link TL-WA3001 is an AX3000 dual-band Wi-Fi 6 access point that turns a wired connection from your router into Wi-Fi, at up to 2402Mbps on 5GHz and 574Mbps on 2.4GHz. Its Gigabit port accepts passive PoE and a PoE injector is in the box, so one Ethernet cable carries both data and power. It also runs as a range extender, a client or a multi-SSID access point.
The TP-Link TL-WA3001 is an AX3000 dual-band Wi-Fi 6 access point that turns a wired connection from your router into Wi-Fi, at up to 2402Mbps on 5GHz and 574Mbps on 2.4GHz. Its Gigabit port accepts passive PoE and a PoE injector is in the box, so one Ethernet cable carries both data and power. It also runs as a range extender, a client or a multi-SSID access point.

Both bands run 802.11ax: up to 2402Mbps on 5GHz and 574Mbps on 2.4GHz, sold as AX3000. Wi-Fi 5 and older devices connect as normal, while Wi-Fi 6 phones and laptops get the higher AX speeds. These are maximum wireless rates, and the wired port is Gigabit.

Both bands run 802.11ax: up to 2402Mbps on 5GHz and 574Mbps on 2.4GHz, sold as AX3000. Wi-Fi 5 and older devices connect as normal, while Wi-Fi 6 phones and laptops get the higher AX speeds. These are maximum wireless rates, and the wired port is Gigabit.

The included passive PoE injector, fed by the 48V/0.5A power adapter from a wall socket, also takes the cable from your router. A single Ethernet cable then carries both data and electricity to the TL-WA3001, so it needs no power socket where it is placed. TP-Link lists passive PoE only, not 802.3af/at PoE.
The included passive PoE injector, fed by the 48V/0.5A power adapter from a wall socket, also takes the cable from your router. A single Ethernet cable then carries both data and electricity to the TL-WA3001, so it needs no power socket where it is placed. TP-Link lists passive PoE only, not 802.3af/at PoE.


Access point is the default mode. Multi-SSID mode runs up to four separate SSIDs and VLANs on each band, for example one per office, range extender mode repeats an existing Wi-Fi network, and client mode connects a wired device such as a games console or IPTV box to Wi-Fi.

Access point is the default mode. Multi-SSID mode runs up to four separate SSIDs and VLANs on each band, for example one per office, range extender mode repeats an existing Wi-Fi network, and client mode connects a wired device such as a games console or IPTV box to Wi-Fi.

Four fixed external antennas with beamforming focus the Wi-Fi signal toward connected devices. TP-Link's graphic sets the TL-WA3001 with beamforming against a regular access point without it.
Four fixed external antennas with beamforming focus the Wi-Fi signal toward connected devices. TP-Link's graphic sets the TL-WA3001 with beamforming against a regular access point without it.


The rear carries the power input, a power on/off button, the Gigabit Ethernet port, a reset button and a WPS button. Set it up in the web interface or with WPS, and share the Wi-Fi with guests through a QR code. SNMP and Ping Watchdog are built in.

The rear carries the power input, a power on/off button, the Gigabit Ethernet port, a reset button and a WPS button. Set it up in the web interface or with WPS, and share the Wi-Fi with guests through a QR code. SNMP and Ping Watchdog are built in.

The TL-WA3001 supports WPA, WPA2, WPA3 and WPA/WPA2-Enterprise encryption. A captive portal page can show guests an advert or a set of terms before they get internet access. TP-Link lists it at 240 x 165 x 43.6mm.
The TL-WA3001 supports WPA, WPA2, WPA3 and WPA/WPA2-Enterprise encryption. A captive portal page can show guests an advert or a set of terms before they get internet access. TP-Link lists it at 240 x 165 x 43.6mm.

Everything you need to know about this product
Yes. The box holds a PoE power injector, a power adapter and an Ethernet cable, so one cable can carry power and data to the access point.
TP-Link lists passive PoE only, not 802.3af/at PoE. Power it with the included passive PoE injector or the 48V/0.5A power adapter.
Up to 2402Mbps on 5GHz and 574Mbps on 2.4GHz, sold as AX3000. These are maximum wireless rates, and the wired port is Gigabit.
An access point gets its internet over an Ethernet cable from your router and turns it into Wi-Fi, so it is not repeating a wireless signal. The TL-WA3001 can also run in range extender mode where no cable reaches.
It has the features for one: multi-SSID with up to four SSIDs and VLANs per band, a captive portal, WPA3 and WPA/WPA2-Enterprise security, and passive PoE for a single-cable install.
Yes. It supports WPA, WPA2, WPA3 and WPA/WPA2-Enterprise.
No. Wi-Fi 5 and older devices connect as normal. Wi-Fi 6 phones and laptops get the higher AX speeds.
TP-Link lists it at 240 x 165 x 43.6mm, with four fixed antennas and one Gigabit Ethernet port.
AI-Generated Content: These FAQs are generated by an automated AI system and may contain inaccuracies or omissions. Evetech makes no warranties, express or implied, regarding their completeness or reliability. For definitive information, please refer to the manufacturer's official specifications.









Please Note: Product images are for illustrative purposes only and may differ from the actual product.
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderTP-Link TL-WA3001 AX3000 Dual-Band Wi-Fi 6 Access Point
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builder