
Trusted Partners
The TP-Link TL-WPA4220 is a single AV600 powerline Wi-Fi extender, sold on its own without a second adapter. It only works with another HomePlug AV or AV2 powerline adapter that is plugged in near your router and cabled to it. Add it to that network and the room it is plugged into gets 300Mbps 2.4GHz Wi-Fi and two 10/100 Ethernet ports. The TL-WPA4220 KIT includes both units.
The TP-Link TL-WPA4220 is a single AV600 powerline Wi-Fi extender, sold on its own without a second adapter. It only works with another HomePlug AV or AV2 powerline adapter that is plugged in near your router and cabled to it. Add it to that network and the room it is plugged into gets 300Mbps 2.4GHz Wi-Fi and two 10/100 Ethernet ports. The TL-WPA4220 KIT includes both units.

A powerline adapter at the router sends the connection through the home's electrical wiring to the TL-WPA4220 in another room, which turns it into Wi-Fi and wired ports. HomePlug AV2 (IEEE 1901) carries data at up to 600Mbps over up to 300m of circuit, and both units must be on the same electrical circuit. Press Pair on each unit to encrypt the powerline link with 128-bit AES.

A powerline adapter at the router sends the connection through the home's electrical wiring to the TL-WPA4220 in another room, which turns it into Wi-Fi and wired ports. HomePlug AV2 (IEEE 1901) carries data at up to 600Mbps over up to 300m of circuit, and both units must be on the same electrical circuit. Press Pair on each unit to encrypt the powerline link with 128-bit AES.

Two 10/100Mbps Ethernet ports on the base connect wired devices such as a smart TV, games console or PC, and one Ethernet cable is in the box. Each port tops out at 100Mbps, and real powerline speed depends on the wiring, the distance and electrical noise.
Two 10/100Mbps Ethernet ports on the base connect wired devices such as a smart TV, games console or PC, and one Ethernet cable is in the box. Each port tops out at 100Mbps, and real powerline speed depends on the wiring, the distance and electrical noise.


The TL-WPA4220 adds a 2.4GHz 802.11b/g/n Wi-Fi point rated up to 300Mbps. Press Wi-Fi Clone on the extender, then WPS on the router, and it copies the router's Wi-Fi name and password. Wi-Fi Auto-Sync keeps the name, password, Wi-Fi schedule and LED schedule the same on every extender in the powerline network. LEDs show power, powerline, Ethernet and Wi-Fi status.

The TL-WPA4220 adds a 2.4GHz 802.11b/g/n Wi-Fi point rated up to 300Mbps. Press Wi-Fi Clone on the extender, then WPS on the router, and it copies the router's Wi-Fi name and password. Wi-Fi Auto-Sync keeps the name, password, Wi-Fi schedule and LED schedule the same on every extender in the powerline network. LEDs show power, powerline, Ethernet and Wi-Fi status.

TP-Link advises plugging powerline adapters directly into a wall outlet, because a power strip or surge protector can filter or block the signal and cut the speed. The TL-WPA4220 has no pass-through socket, so the wall socket it uses is taken. It measures 54 x 40 x 94mm.
TP-Link advises plugging powerline adapters directly into a wall outlet, because a power strip or surge protector can filter or block the signal and cut the speed. The TL-WPA4220 has no pass-through socket, so the wall socket it uses is taken. It measures 54 x 40 x 94mm.


Change Wi-Fi settings, set Wi-Fi schedules and control the LEDs from the tpPLC app on Android or iOS, the tpPLC Utility on a PC, or the web interface. The unit draws 5.6W at most and 5.2W in typical use.

Change Wi-Fi settings, set Wi-Fi schedules and control the LEDs from the tpPLC app on Android or iOS, the tpPLC Utility on a PC, or the web interface. The unit draws 5.6W at most and 5.2W in typical use.
Everything you need to know about this product
No. It is an add-on unit and needs at least one other powerline adapter on the same electrical circuit, plugged in near your router and connected to it with a cable. If you have none yet, the TL-WPA4220 KIT includes both units.
All HomePlug AV and AV2 standard powerline adapters, according to TP-Link. Both units must be on the same electrical circuit.
Plug it straight into a wall socket. TP-Link says a power strip or surge protector can filter or block the powerline signal and cut the speed significantly. The TL-WPA4220 has no pass-through socket.
No. 600Mbps is the HomePlug physical-layer maximum. Real speed depends on your wiring, the distance and electrical noise, and each Ethernet port tops out at 100Mbps.
No. It is a 2.4GHz 802.11b/g/n Wi-Fi point rated up to 300Mbps.
Not if you use Wi-Fi Clone: press it on the TL-WPA4220, then WPS on your router, and it copies the router's Wi-Fi name and password.
An EU plug, according to TP-Link's South African spec page. It has no pass-through socket, so the wall socket it uses is taken.
One TL-WPA4220 extender, one Ethernet cable and a quick installation guide. A second powerline adapter is not included.
AI-Generated Content: These FAQs are generated by an automated AI system and may contain inaccuracies or omissions. Evetech makes no warranties, express or implied, regarding their completeness or reliability. For definitive information, please refer to the manufacturer's official specifications.







Please Note: Product images are for illustrative purposes only and may differ from the actual product.
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderTP-Link TL-WPA4220 AV600 Powerline Wi-Fi Extender
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builder