Antec C3 RGB Constellation Gaming Case
Antec C3 ARGB ATX Mid-Tower Case - Black / Seamless Tempered Glass Front And Side / 360mm Radiator Support / Up To 8 Fan Capacity / USB-C Front Panel / Mid-Tower ATX Form Factor / 4x ARGB PWM Fans Included / 0-761345-10029-8
2 Years Local Warranty
Model No : Antec 0-761345-10029-8
Price Inc. Vat
R 1,499
Save R 500
ListR 1,999
1499Change Quantity:
In Stock with Evetech
Antec C3 ARGB Mid-Tower ATX Case — 360mm Radiator, Type-C
A Black Mid Tower With Full-View Glass
The Antec C3 ARGB in black is a Constellation Series mid tower with a tempered glass front and side, so the build is on show from two angles. It comes with 4 x 120mm PWM ARGB fans already fitted, a built-in fan controller and a Type-C 3.2 Gen 2 port on the front. The interior takes ATX, Micro-ATX and ITX boards, GPUs up to 415mm and a 360mm radiator at the top.
A Black Mid Tower With Full-View Glass
The Antec C3 ARGB in black is a Constellation Series mid tower with a tempered glass front and side, so the build is on show from two angles. It comes with 4 x 120mm PWM ARGB fans already fitted, a built-in fan controller and a Type-C 3.2 Gen 2 port on the front. The interior takes ATX, Micro-ATX and ITX boards, GPUs up to 415mm and a 360mm radiator at the top.
Panoramic Glass At The Front And Side
The glass panels meet at the corner with no pillar in the way, giving a clear view of the motherboard and the graphics card. The side glass is 4mm tempered glass. An inclined power supply shroud with an ARGB lighting strip adds another light line along the bottom of the view.
Panoramic Glass At The Front And Side
The glass panels meet at the corner with no pillar in the way, giving a clear view of the motherboard and the graphics card. The side glass is 4mm tempered glass. An inclined power supply shroud with an ARGB lighting strip adds another light line along the bottom of the view.
Honeycomb Mesh On Top, Bottom And Side
The top, the bottom and the right side use honeycomb mesh so air can pass through while dust is held back. That mesh pairs with the three reverse fans on the right side, which pull air in through the side of the case. The arrows in this graphic mark the intake and exhaust paths.
Honeycomb Mesh On Top, Bottom And Side
The top, the bottom and the right side use honeycomb mesh so air can pass through while dust is held back. That mesh pairs with the three reverse fans on the right side, which pull air in through the side of the case. The arrows in this graphic mark the intake and exhaust paths.
Four ARGB PWM Fans Already Installed
Three 120mm PWM ARGB reverse fans sit on the right side and one 120mm PWM ARGB fan sits at the rear. A built-in controller handles the fan speed and the lighting effects, which can also be switched with the LED control button. That means nothing extra to buy before you power on.
Four ARGB PWM Fans Already Installed
Three 120mm PWM ARGB reverse fans sit on the right side and one 120mm PWM ARGB fan sits at the rear. A built-in controller handles the fan speed and the lighting effects, which can also be switched with the LED control button. That means nothing extra to buy before you power on.
A 360mm Radiator On Top, 240mm At The Side
The top mount takes 120, 140, 240, 280 or 360mm radiators, and the side mount takes 120 or 240mm. Antec states that a 360mm top radiator and a 240mm side radiator fit at the same time. The rear adds one more 120mm mount for an exhaust fan or radiator.
A 360mm Radiator On Top, 240mm At The Side
The top mount takes 120, 140, 240, 280 or 360mm radiators, and the side mount takes 120 or 240mm. Antec states that a 360mm top radiator and a 240mm side radiator fit at the same time. The rear adds one more 120mm mount for an exhaust fan or radiator.
Up To 8 Fans In One Case
The case supports 8 x 120mm fans at the same time. The top takes 3 x 120mm or 2 x 140mm, the side takes 3 x 120mm, the bottom takes 1 x 120mm once the HDD cage is out, and the rear takes 1 x 120mm. This chart lays the fan and radiator positions side by side.
Up To 8 Fans In One Case
The case supports 8 x 120mm fans at the same time. The top takes 3 x 120mm or 2 x 140mm, the side takes 3 x 120mm, the bottom takes 1 x 120mm once the HDD cage is out, and the rear takes 1 x 120mm. This chart lays the fan and radiator positions side by side.
Front Ports With Type-C 3.2 Gen 2
The front panel has a Power button, an LED Control Button, a USB 3.0 port, a Type-C 3.2 Gen 2 port and a headphone and mic combo jack. Antec labels the Type-C port as the high-speed one. Only one USB 3.0 port is fitted, so a hub or a motherboard header may be needed for more.
Front Ports With Type-C 3.2 Gen 2
The front panel has a Power button, an LED Control Button, a USB 3.0 port, a Type-C 3.2 Gen 2 port and a headphone and mic combo jack. Antec labels the Type-C port as the high-speed one. Only one USB 3.0 port is fitted, so a hub or a motherboard header may be needed for more.
Four Dust Filters, Three Of Them Magnetic
Magnetic filters cover the top, the bottom and the right side, and another flat filter sits at the bottom. Together that makes 4 dust filters for the three mesh sides. The panels exploded in this view show where each filter lies, and the magnets make them easy to lift off and rinse.
Four Dust Filters, Three Of Them Magnetic
Magnetic filters cover the top, the bottom and the right side, and another flat filter sits at the bottom. Together that makes 4 dust filters for the three mesh sides. The panels exploded in this view show where each filter lies, and the magnets make them easy to lift off and rinse.
A Removable HDD Cage For More Airflow
Two modes are shown: a multi hard drive mode with the removable HDD cage left in, and a high airflow mode with the cage out and a 120mm reverse fan added at the bottom. The case lists 1 x 3.5 inch or 2.5 inch bay and 3 x 2.5 inch bays, so decide which layout suits your storage.
A Removable HDD Cage For More Airflow
Two modes are shown: a multi hard drive mode with the removable HDD cage left in, and a high airflow mode with the cage out and a 120mm reverse fan added at the bottom. The case lists 1 x 3.5 inch or 2.5 inch bay and 3 x 2.5 inch bays, so decide which layout suits your storage.
FAQ
Frequently Asked Questions
Everything you need to know about this product
Yes, it includes 4 x 120mm PWM ARGB fans, three reverse fans on the right side and one fan at the rear.
Yes, the top mount supports 120, 140, 240, 280 and 360mm radiators, and the side supports 120 or 240mm.
It supports 8 x 120mm fans at the same time, spread across the top, side, bottom and rear.
The case supports ATX, Micro-ATX and ITX motherboards and has 7 expansion slots.
Antec lists a maximum GPU length of 415mm, a CPU cooler height of up to 160mm and a power supply length of up to 195mm including cables.
Yes, the front panel has one Type-C 3.2 Gen 2 port and one USB 3.0 port, plus a headphone and mic combo jack.
The case measures 470 x 210 x 485mm (DWH) and has a net weight of 7.56 kg.
Yes, the HDD cage is removable, and after removal you can install 1 x 120mm fan at the bottom.
AI-Generated Content: These FAQs are generated by an automated AI system and may contain inaccuracies or omissions. Evetech makes no warranties, express or implied, regarding their completeness or reliability. For definitive information, please refer to the manufacturer's official specifications.
Please Note: Product images are for illustrative purposes only and may differ from the actual product.
Choose your
own PC
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderPrice Inc. Vat
R 1,499
Save R 500
ListR 1,999
1499Change Quantity:
In Stock with Evetech
Choose your
own PC
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderAntec C3 RGB Constellation Gaming Case
