Gamemax CLAW 460 Mid-Tower Gaming Case - Black / Supports ATX, M-ATX & ITX Motherboards / Tool-Free Glass Side Panel / Supports up to 9x 120mm Fans / 3x 140mm + 1x 120mm ARGB Fans Pre-Installed / CLAW-460-BK / CLAW-460-BK

The Gamemax CLAW 460 Mid-Tower Gaming PC Case is a mid-tower chassis that takes ATX, M-ATX and ITX motherboards, with a tool-free glass side panel that opens the build up to view. It takes up to nine 120mm fans and ships with four ARGB fans already installed (three 140mm at the front, one 120mm at the rear), so airflow and lighting are sorted before the first component goes in. Gamemax aims it at first-time builders and content creators who want a small form factor without giving up cooling.

The CLAW 460 leads with an aggressive claw-inspired front panel paired with Gamemax's own sculpted ventilation mesh. The mesh is the airflow path as well as the styling, so the front of the case pulls air in rather than blocking it behind a solid slab. It gives the chassis a distinct silhouette on a desk while feeding the intake fans directly.

A high-airflow mesh front works with a vertical airflow layout to move heat through the chassis and out. Cool air enters across the full front face and rises past the motherboard and graphics card instead of pooling around them. That matters during long gaming sessions and heavy workloads, where sustained heat rather than a short spike is what throttles components.

Efficient airflow keeps components cool during extended gaming or streaming sessions, which is where a case earns its keep. Gamemax positions the CLAW 460 for gamers and streamers who run a machine hard for hours rather than in short bursts. The combination of mesh intake and pre-installed fans is what sustains that, not a single high-speed fan.

Four ARGB fans come pre-installed in the CLAW 460, giving you customisable lighting effects out of the box rather than as a separate purchase. The tool-free glass side panel puts that lighting on display across the whole interior. For a first build it removes one of the more fiddly steps, since the fans are already mounted and positioned.

The cooling specification lists three 140mm Tornado-T14 fans across the front for intake and a single 120mm Tornado-T12 fan at the rear for exhaust. That is a front-to-back path with more intake area than exhaust, which keeps positive pressure inside the chassis.

An adjustable GPU support bracket is built in to hold up the graphics card and stop it sagging under its own weight. Long, heavy cards put constant strain on the PCIe slot and the motherboard around it, and that strain only gets worse over months of use. The bracket adjusts to the card you fit rather than sitting at one fixed height.

The CLAW 460 uses an extended bottom seal on the case panel to block dust, insects and debris from reaching the hardware compartment. Gamemax calls it an anti-insect design, and it addresses the gap most chassis leave along the base. Keeping that path closed means less settled dust on the components and fewer surprises when you open the case later.

Liquid cooling is supported at 120mm, 140mm, 240mm, 280mm and 360mm, with the rear position taking a 120mm radiator. That range covers everything from a compact all-in-one to a full 360mm loop, so the case does not cap what CPU cooler you can move to later. Radiator support sits alongside the pre-installed air cooling rather than replacing it.

Gamemax builds the CLAW 460 for current high-performance GPUs, with the internal clearance and cooling to match next-generation graphics cards. That keeps the chassis useful across an upgrade rather than forcing a case change with the card. The airflow design and the GPU support bracket are both part of what makes room for a larger card.

The glass side panel is tool-free, so it comes off and goes back on without a screwdriver. That speeds up the first build and every cable change or component swap afterwards. It is also what makes the pre-installed ARGB lighting visible, since the panel is clear glass rather than a solid steel side.

A magnetic dust filter covers the top of the chassis, catching debris while still letting warm air escape. Because it is magnetic it lifts straight off for a rinse and snaps back into place, with no clips or screws involved. Filtering the top vent is what keeps the interior clean between builds rather than only at build time.

A dedicated PSU dust filter sits over the power supply intake, keeping airflow to the unit clean without restricting it. The power supply pulls air from outside the chassis, so its intake is the one most exposed to floor dust. Filtering it protects the component and keeps the rest of the interior cleaner too.

The CLAW 460 allows a CPU cooler height of up to 175mm and a graphics card length of up to 420mm. Those two numbers decide most builds, since they set the ceiling on tower air coolers and on the long triple-fan cards. Check both against your parts list before ordering, because they are the limits that bite.

This is a small form factor gaming case, sized for a home office setup or a desk rather than a dedicated floor space. Gamemax points it at beginners and content creators putting together a first gaming PC, where a compact footprint and pre-installed fans cut the number of decisions. The front I/O panel keeps everyday connections reachable at desk height.

The CLAW 460 takes ATX, M-ATX and ITX motherboards, so it suits a full-size gaming board as well as a smaller build. The internal layout is arranged around the motherboard tray with the cooling and cable paths running past it.

Storage runs two ways: two 3.5-inch hard drives plus one 2.5-inch SSD, or one 3.5-inch hard drive plus two 2.5-inch SSDs. That gives you the choice between bulk capacity and a second solid state drive without changing anything else in the build. Three drives total is the ceiling in either arrangement.