Trusted Partners
The TP-Link CPE710 is a 5GHz 802.11ac outdoor CPE with a 23dBi dish, for wireless links between buildings, sheds or a WISP tower. It runs 2x2 MIMO at up to 867Mbps and is IP65 water and dust proof.
The TP-Link CPE710 is a 5GHz 802.11ac outdoor CPE with a 23dBi dish, for wireless links between buildings, sheds or a WISP tower. It runs 2x2 MIMO at up to 867Mbps and is IP65 water and dust proof.

The three-panel metal reflector focuses the signal into a 9 degree azimuth and 7 degree elevation beam, with up to 27dBm of transmit power, adjustable in 1dBm steps.

The three-panel metal reflector focuses the signal into a 9 degree azimuth and 7 degree elevation beam, with up to 27dBm of transmit power, adjustable in 1dBm steps.

TP-Link's exploded view shows the feed, the centre panel and the two side reflectors clipping together, with the pole-mount bracket and clamp. Three-axis alignment helps aim it.
TP-Link's exploded view shows the feed, the centre panel and the two side reflectors clipping together, with the pole-mount bracket and clamp. Three-axis alignment helps aim it.


The enclosure is IP65 rated, with 15kV ESD and 6kV lightning protection and a -40C to 70C rating. TP-Link notes the lightning protection needs proper grounding and shielding.

The enclosure is IP65 rated, with 15kV ESD and 6kV lightning protection and a -40C to 70C rating. TP-Link notes the lightning protection needs proper grounding and shielding.

One shielded Gigabit port carries data and 24V passive PoE from the adapter in the box. It is not 802.3af/at, so it is not powered from a standard PoE switch. PharOS and Pharos Control manage it.
One shielded Gigabit port carries data and 24V passive PoE from the adapter in the box. It is not 802.3af/at, so it is not powered from a standard PoE switch. PharOS and Pharos Control manage it.

Everything you need to know about this product
Long outdoor wireless links on 5GHz: joining two buildings, reaching a shed or a borehole camera, or connecting a customer to a WISP tower. You normally use a pair, one at each end.
Up to 867Mbps on an 80MHz 5GHz channel with 2x2 MIMO. Real throughput depends on distance, line of sight and interference.
Yes. Its 23dBi dish has a narrow 9 degree beam, so the two ends must see each other and be aimed at each other. The firmware has an antenna alignment tool.
By 24V passive PoE over the network cable, from the adapter in the box. It is not standard 802.3af/at PoE, so do not power it from a normal PoE switch.
Yes. It is IP65 water and dust proof, rated from -40C to 70C, with 15kV ESD and 6kV lightning protection. TP-Link notes the lightning protection needs proper grounding and shielding.
One shielded Gigabit (10/100/1000Mbps) port, which carries both data and the passive PoE power.
Yes. PharOS runs it in AP, client, AP router or WISP client mode, and Pharos Control can manage several units from one place.
The CPE710, a 24V passive PoE adapter, a pole mounting kit, an AC power cord and an installation guide.
AI-Generated Content: These FAQs are generated by an automated AI system and may contain inaccuracies or omissions. Evetech makes no warranties, express or implied, regarding their completeness or reliability. For definitive information, please refer to the manufacturer's official specifications.





Please Note: Product images are for illustrative purposes only and may differ from the actual product.
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderHand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderTP-Link CPE710 5GHz AC867 23dBi Outdoor CPE
