Trusted Partners
The Antec Omni Matrix 240 ARGB Black is a 240mm AIO liquid CPU cooler with a four-sided infinity mirror fan frame, full ARGB rings on the fans and an ARGB mirror-finish pump head. A 2500RPM pump and two pre-connected 120mm PWM fans at 800-1800RPM keep the loop moving. It fits Intel LGA 1851 and 1700 and AMD AM5 and AM4.
The Antec Omni Matrix 240 ARGB Black is a 240mm AIO liquid CPU cooler with a four-sided infinity mirror fan frame, full ARGB rings on the fans and an ARGB mirror-finish pump head. A 2500RPM pump and two pre-connected 120mm PWM fans at 800-1800RPM keep the loop moving. It fits Intel LGA 1851 and 1700 and AMD AM5 and AM4.

The lighting runs through the frame edges, the fan rings and the pump head, so the whole cooler lights up instead of only the pump. Two 120mm fans sit in one 240mm frame on a 275mm long radiator, with black braided tubing running to the pump head.

The lighting runs through the frame edges, the fan rings and the pump head, so the whole cooler lights up instead of only the pump. Two 120mm fans sit in one 240mm frame on a 275mm long radiator, with black braided tubing running to the pump head.

A multi-layer reflective design on all four sides of the fan frame gives the lighting depth, so each lit edge reads as a tunnel of light rather than a flat strip. The frame is 28mm thick and holds both fans.
A multi-layer reflective design on all four sides of the fan frame gives the lighting depth, so each lit edge reads as a tunnel of light rather than a flat strip. The frame is 28mm thick and holds both fans.


Each black fan has an ARGB ring on the frame and another around the centre hub. They are hydraulic-bearing fans at 800-1800RPM, with 42.9CFM, 1.47mmH2O and 28.6dBA per fan, and they are pre-connected so they need only one cable. Rated life for the fans is 40,000 hours.

Each black fan has an ARGB ring on the frame and another around the centre hub. They are hydraulic-bearing fans at 800-1800RPM, with 42.9CFM, 1.47mmH2O and 28.6dBA per fan, and they are pre-connected so they need only one cable. Rated life for the fans is 40,000 hours.

The mirror-finish pump head layers its lighting so the glow shifts with the viewing angle. The pump runs at 2500RPM, is rated at 26.9dBA or less and has a 40,000-hour lifespan, while braided tubing protects the loop against external damage.
The mirror-finish pump head layers its lighting so the glow shifts with the viewing angle. The pump runs at 2500RPM, is rated at 26.9dBA or less and has a 40,000-hour lifespan, while braided tubing protects the loop against external damage.


The aluminium radiator is 275mm long and 27mm thick, sized for a 240mm mount in the case, and an ARGB strip runs along its top edge. Allow about 55mm of depth for the radiator plus the 28mm fan frame. The whole cooler weighs 1.2kg.

The aluminium radiator is 275mm long and 27mm thick, sized for a 240mm mount in the case, and an ARGB strip runs along its top edge. Allow about 55mm of depth for the radiator plus the 28mm fan frame. The whole cooler weighs 1.2kg.
Supported sockets are Intel LGA 1851, 1700, 1200, 115X, 1366, 20XX and 775, and AMD AM5, AM4, AM3, AM3+, AM2, AM2+, FM2, FM2+ and FM1. The fans share one 4-pin PWM connector and light from 5V 3-pin ARGB connectors. Antec lists the fan lighting at up to 2.05A, so check what the board's ARGB header can supply.
Supported sockets are Intel LGA 1851, 1700, 1200, 115X, 1366, 20XX and 775, and AMD AM5, AM4, AM3, AM3+, AM2, AM2+, FM2, FM2+ and FM1. The fans share one 4-pin PWM connector and light from 5V 3-pin ARGB connectors. Antec lists the fan lighting at up to 2.05A, so check what the board's ARGB header can supply.
Everything you need to know about this product
Antec does not publish a TDP figure for it. It runs a 240mm radiator (275 x 120 x 27mm) with a 2500RPM pump and two 120mm fans at up to 1800RPM and 42.9CFM each.
Antec rates the pump at 26.9dBA or less and each fan at 28.6dBA. Under PWM control the fans slow to around 800RPM when the CPU is not working hard.
Yes. The pre-connected fans share one 4-pin PWM connector, so the motherboard sets 800-1800RPM by CPU temperature. The pump uses a 3-pin connector rated at 2500RPM.
No refilling. It is a sealed loop with braided tubing that protects it against external damage, and Antec rates the pump for 40,000 hours.
Intel LGA 1851, 1700, 1200, 115X, 1366, 20XX and 775, and AMD AM5, AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2 and FM1.
The fans and pump head use 5V 3-pin ARGB connectors, so they follow your motherboard's ARGB software. Antec lists the fan lighting at up to 2.05A, so check what your board's ARGB header can supply.
Your case needs a 240mm radiator mount. The radiator is 275 x 120 x 27mm and the fan frame is 28mm thick, so allow about 55mm of depth for radiator plus fans.
If lighting is the point of your build, it puts infinity mirror edges, full-ring ARGB fans and a mirror pump head on a 240mm AIO with pre-connected fans that save on cabling.
AI-Generated Content: These FAQs are generated by an automated AI system and may contain inaccuracies or omissions. Evetech makes no warranties, express or implied, regarding their completeness or reliability. For definitive information, please refer to the manufacturer's official specifications.







Please Note: Product images are for illustrative purposes only and may differ from the actual product.
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderHand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderAntec Omni Matrix 240 ARGB AIO Liquid CPU Cooler







