Trusted Partners
The Antec Omni Matrix 360 ARGB Black is a 360mm AIO liquid CPU cooler with three pre-connected 120mm PWM fans in a four-sided infinity mirror frame and an ARGB mirror-finish pump head. The pump runs at 2700RPM and is rated at 29dBA or less, and the fans run 800-1800RPM. Intel LGA 1851 and 1700 and AMD AM5 and AM4 fit.
The Antec Omni Matrix 360 ARGB Black is a 360mm AIO liquid CPU cooler with three pre-connected 120mm PWM fans in a four-sided infinity mirror frame and an ARGB mirror-finish pump head. The pump runs at 2700RPM and is rated at 29dBA or less, and the fans run 800-1800RPM. Intel LGA 1851 and 1700 and AMD AM5 and AM4 fit.

ARGB runs through the frame edges, the ring on each fan and the pump head, so the lighting covers the whole cooler. Three 120mm fans share one 360mm frame, set on a 395mm long radiator and linked by black braided tubing.

ARGB runs through the frame edges, the ring on each fan and the pump head, so the lighting covers the whole cooler. Three 120mm fans share one 360mm frame, set on a 395mm long radiator and linked by black braided tubing.

The reflective design on all four sides of the fan frame stacks the light in layers, so the edge glows with depth. At 28mm thick, the frame holds all three fans,. The frame is the four-sided infinity mirror design, with ARGB on every edge.
The reflective design on all four sides of the fan frame stacks the light in layers, so the edge glows with depth. At 28mm thick, the frame holds all three fans,. The frame is the four-sided infinity mirror design, with ARGB on every edge.


Every fan has an ARGB ring on the frame and another around the hub. The hydraulic-bearing fans reach 800-1800RPM with 42.9CFM, 1.47mmH2O and 28.6dBA each, and the pre-connected leads need only one cable to the board. Under PWM control the fans slow to around 800RPM at light load.

Every fan has an ARGB ring on the frame and another around the hub. The hydraulic-bearing fans reach 800-1800RPM with 42.9CFM, 1.47mmH2O and 28.6dBA each, and the pre-connected leads need only one cable to the board. Under PWM control the fans slow to around 800RPM at light load.

The mirror-finish pump head layers its lighting, and the glow shifts with the viewing angle. The pump turns at 2700RPM with a flow rate up to 2167mL/min and a 40,000-hour lifespan, and braided tubing protects the loop against external damage. The pump head is 69mm across and 51mm deep, with a 3-pin connector for the pump.
The mirror-finish pump head layers its lighting, and the glow shifts with the viewing angle. The pump turns at 2700RPM with a flow rate up to 2167mL/min and a 40,000-hour lifespan, and braided tubing protects the loop against external damage. The pump head is 69mm across and 51mm deep, with a 3-pin connector for the pump.


The aluminium radiator is 395mm long and 27mm thick, for a 360mm mount, and an ARGB strip runs along its top edge. With the 28mm fan frame, allow about 55mm of depth in the case. The complete cooler weighs 1.45kg, so check the case mount is firm.

The aluminium radiator is 395mm long and 27mm thick, for a 360mm mount, and an ARGB strip runs along its top edge. With the 28mm fan frame, allow about 55mm of depth in the case. The complete cooler weighs 1.45kg, so check the case mount is firm.
Sockets covered are Intel LGA 1851, 1700, 1200, 115X, 1366, 20XX and 775, and AMD AM5, AM4, AM3, AM3+, AM2, AM2+, FM2, FM2+ and FM1. The fans share one 4-pin PWM connector, and the lighting is rated up to 2.92A on the fans, so check what the board's ARGB header can supply.
Sockets covered are Intel LGA 1851, 1700, 1200, 115X, 1366, 20XX and 775, and AMD AM5, AM4, AM3, AM3+, AM2, AM2+, FM2, FM2+ and FM1. The fans share one 4-pin PWM connector, and the lighting is rated up to 2.92A on the fans, so check what the board's ARGB header can supply.
Everything you need to know about this product
Antec does not publish a TDP figure for it. It runs a 360mm radiator (395 x 120 x 27mm) with a 2700RPM pump and three 120mm fans at up to 1800RPM and 42.9CFM each.
Antec rates the pump at 29dBA or less and each fan at 28.6dBA. Under PWM control the fans slow to around 800RPM when the CPU is not working hard.
Yes. The pre-connected fans share one 4-pin PWM connector, so the motherboard sets 800-1800RPM by CPU temperature. The pump uses a 3-pin connector rated at 2700RPM.
No refilling. It is a sealed loop with braided tubing that protects it against external damage, and Antec rates the pump for 40,000 hours.
Intel LGA 1851, 1700, 1200, 115X, 1366, 20XX and 775, and AMD AM5, AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2 and FM1.
The fans and pump head use 5V 3-pin ARGB connectors, so they follow your motherboard's ARGB software. Antec lists the fan lighting at up to 2.92A, so check what your board's ARGB header can supply.
Your case needs a 360mm radiator mount. The radiator is 395 x 120 x 27mm and the fan frame is 28mm thick, so allow about 55mm of depth for radiator plus fans.
If lighting is the point of your build, it puts infinity mirror edges, full-ring ARGB fans and a mirror pump head on a 360mm AIO with pre-connected fans that save on cabling.
AI-Generated Content: These FAQs are generated by an automated AI system and may contain inaccuracies or omissions. Evetech makes no warranties, express or implied, regarding their completeness or reliability. For definitive information, please refer to the manufacturer's official specifications.








Please Note: Product images are for illustrative purposes only and may differ from the actual product.
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderHand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderAntec Omni Matrix 360 ARGB AIO Liquid CPU Cooler








