Trusted Partners
The Antec Omni Matrix 360 ARGB White is a 360mm AIO liquid CPU cooler finished in white, with a four-sided infinity mirror frame around three pre-connected 120mm PWM fans and an ARGB mirror pump head. The 2700RPM pump is rated at 29dBA or less, and the fans run 800-1800RPM. Intel LGA 1851 and 1700 and AMD AM5 and AM4 are supported.
The Antec Omni Matrix 360 ARGB White is a 360mm AIO liquid CPU cooler finished in white, with a four-sided infinity mirror frame around three pre-connected 120mm PWM fans and an ARGB mirror pump head. The 2700RPM pump is rated at 29dBA or less, and the fans run 800-1800RPM. Intel LGA 1851 and 1700 and AMD AM5 and AM4 are supported.

Purple, pink, yellow and blue light runs along the edges of the white frame. The multi-layer reflective design on all four sides gives the lighting depth, and the 28mm thick frame carries all three fans, which are pre-connected so they need only one cable.

Purple, pink, yellow and blue light runs along the edges of the white frame. The multi-layer reflective design on all four sides gives the lighting depth, and the 28mm thick frame carries all three fans, which are pre-connected so they need only one cable.

The ring on each frame and the ring around each hub are ARGB. The three hydraulic-bearing fans reach 800-1800RPM with 42.9CFM, 1.47mmH2O and 28.6dBA each, and their pre-connected leads meet in one cable. The fans are rated for 40,000 hours.
The ring on each frame and the ring around each hub are ARGB. The three hydraulic-bearing fans reach 800-1800RPM with 42.9CFM, 1.47mmH2O and 28.6dBA each, and their pre-connected leads meet in one cable. The fans are rated for 40,000 hours.


The mirror-finish pump head lights its whole face in ARGB behind the Antec logo, and the glow shifts with the viewing angle. The head is 69mm across, and braided white hoses run from it to the radiator. The pump head is 51mm deep and its LED has a separate 3-pin connector.

The mirror-finish pump head lights its whole face in ARGB behind the Antec logo, and the glow shifts with the viewing angle. The head is 69mm across, and braided white hoses run from it to the radiator. The pump head is 51mm deep and its LED has a separate 3-pin connector.

Below the head, the cold plate and tube fittings sit on a 69mm by 51mm housing. The pump runs at 2700RPM at 0.25A and 3W, with a flow rate up to 2167mL/min, and Antec rates its lifespan at 40,000 hours.
Below the head, the cold plate and tube fittings sit on a 69mm by 51mm housing. The pump runs at 2700RPM at 0.25A and 3W, with a flow rate up to 2167mL/min, and Antec rates its lifespan at 40,000 hours.


A braided sleeve in white covers the hoses and protects the loop against external damage. The loop is sealed, so there is no refilling to do. The pump behind them is rated for 40,000 hours, and the tubing runs to a 395mm radiator.

A braided sleeve in white covers the hoses and protects the loop against external damage. The loop is sealed, so there is no refilling to do. The pump behind them is rated for 40,000 hours, and the tubing runs to a 395mm radiator.

The white aluminium radiator is 395mm long and 27mm thick, built for a 360mm mount, with an ARGB strip along the top edge. Add the 28mm fan frame and plan for about 55mm of depth in the case. The cooler weighs 1.45kg complete, so the case mount carries a real load.
The white aluminium radiator is 395mm long and 27mm thick, built for a 360mm mount, with an ARGB strip along the top edge. Add the 28mm fan frame and plan for about 55mm of depth in the case. The cooler weighs 1.45kg complete, so the case mount carries a real load.

Intel LGA 1851, 1700, 1200, 115X, 1366, 20XX and 775 are supported, along with AMD AM5, AM4, AM3, AM3+, AM2, AM2+, FM2, FM2+ and FM1. The lighting uses 5V 3-pin ARGB connectors and is rated at up to 2.92A on the fans.
Intel LGA 1851, 1700, 1200, 115X, 1366, 20XX and 775 are supported, along with AMD AM5, AM4, AM3, AM3+, AM2, AM2+, FM2, FM2+ and FM1. The lighting uses 5V 3-pin ARGB connectors and is rated at up to 2.92A on the fans.
Everything you need to know about this product
Antec does not publish a TDP figure for it. It runs a 360mm radiator (395 x 120 x 27mm) with a 2700RPM pump and three 120mm fans at up to 1800RPM and 42.9CFM each.
Antec rates the pump at 29dBA or less and each fan at 28.6dBA. Under PWM control the fans slow to around 800RPM when the CPU is not working hard.
Yes. The pre-connected fans share one 4-pin PWM connector, so the motherboard sets 800-1800RPM by CPU temperature. The pump uses a 3-pin connector rated at 2700RPM.
No refilling. It is a sealed loop with braided tubing that protects it against external damage, and Antec rates the pump for 40,000 hours.
Intel LGA 1851, 1700, 1200, 115X, 1366, 20XX and 775, and AMD AM5, AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2 and FM1.
The fans and pump head use 5V 3-pin ARGB connectors, so they follow your motherboard's ARGB software. Antec lists the fan lighting at up to 2.92A, so check what your board's ARGB header can supply.
Your case needs a 360mm radiator mount. The radiator is 395 x 120 x 27mm and the fan frame is 28mm thick, so allow about 55mm of depth for radiator plus fans.
If lighting is the point of your build, it puts infinity mirror edges, full-ring ARGB fans and a mirror pump head on a 360mm AIO with pre-connected fans that save on cabling.
AI-Generated Content: These FAQs are generated by an automated AI system and may contain inaccuracies or omissions. Evetech makes no warranties, express or implied, regarding their completeness or reliability. For definitive information, please refer to the manufacturer's official specifications.










Please Note: Product images are for illustrative purposes only and may differ from the actual product.
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderHand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderAntec Omni Matrix 360 ARGB AIO Liquid CPU Cooler










