antec-vision-120-argb-fans-3-pack-black
Antec Vision 120 ARGB Fans 3-Pack - Black / 120mm Infinity Mirror ARGB / 4-Pin PWM 800-1800RPM / 44.5CFM Airflow / 1.36mmH2O Pressure / 29dBA / Hydraulic Bearing / Daisy-Chain / 0-761345-40060-2
1 Year Local Warranty
Model No : Antec 0-761345-40060-2
Price Inc. Vat
R 399
Save R 100
ListR 499
399Change Quantity:
In Stock with Evetech
Antec Vision 120 ARGB Fans 3-Pack - Black
Three 120mm Infinity Mirror ARGB Fans
The Antec Vision 120 ARGB 3-Pack gives a case three 120mm fans with an infinity mirror hub and linear ARGB strips on the front and sides of the frame. Each fan runs 800-1800RPM from a 4-pin PWM header for up to 44.5CFM and 1.36mmH2O at 29dBA, on a hydraulic bearing rated for 30,000 hours.
Three 120mm Infinity Mirror ARGB Fans
The Antec Vision 120 ARGB 3-Pack gives a case three 120mm fans with an infinity mirror hub and linear ARGB strips on the front and sides of the frame. Each fan runs 800-1800RPM from a 4-pin PWM header for up to 44.5CFM and 1.36mmH2O at 29dBA, on a hydraulic bearing rated for 30,000 hours.
Infinity Mirror Hub Lit By 6 LEDs
The centre of every fan is an infinity mirror hub lit by 6 LEDs, which stacks the colour into a tunnel of reflected light. The blade area around it glows in a smooth colour sweep, so the fan reads as one lit disc through a glass panel.
Infinity Mirror Hub Lit By 6 LEDs
The centre of every fan is an infinity mirror hub lit by 6 LEDs, which stacks the colour into a tunnel of reflected light. The blade area around it glows in a smooth colour sweep, so the fan reads as one lit disc through a glass panel.
16 LEDs Along Each Side Of The Frame
Besides the 6 LEDs at the centre, each fan carries 16 LEDs on each side, set into linear ARGB strips along the frame. The close-up pair shows the hub and the side strip together. All of the lighting runs from one 3-pin 5V ARGB connector.
16 LEDs Along Each Side Of The Frame
Besides the 6 LEDs at the centre, each fan carries 16 LEDs on each side, set into linear ARGB strips along the frame. The close-up pair shows the hub and the side strip together. All of the lighting runs from one 3-pin 5V ARGB connector.
Light That Shows From The Glass Side
Linear ARGB strips run along the front and sides of the frame, so the lighting is visible at an angle as well as head-on. The thick frame edge carries the strip, and the dark grey body keeps the colour as the focus of the fan.
Light That Shows From The Glass Side
Linear ARGB strips run along the front and sides of the frame, so the lighting is visible at an angle as well as head-on. The thick frame edge carries the strip, and the dark grey body keeps the colour as the focus of the fan.
800-1800RPM Blades For Case Airflow
The blade side of the fan moves up to 44.5CFM with 1.36mmH2O of air pressure at its top speed of 1800RPM. Three in the front of a case give a steady intake for the GPU and CPU cooler, and the 4-pin PWM header lets the motherboard slow them to 800RPM when the load is light.
800-1800RPM Blades For Case Airflow
The blade side of the fan moves up to 44.5CFM with 1.36mmH2O of air pressure at its top speed of 1800RPM. Three in the front of a case give a steady intake for the GPU and CPU cooler, and the 4-pin PWM header lets the motherboard slow them to 800RPM when the load is light.
Hydraulic Bearing And 8 Anti-Vibration Pads
The back of the frame carries the model label. The hydraulic bearing is rated for 30,000 hours at 25 deg C, and 8 silicone rubber pads per fan keep vibration out of the case so noise stays at or below 29dBA at 1800RPM.
Hydraulic Bearing And 8 Anti-Vibration Pads
The back of the frame carries the model label. The hydraulic bearing is rated for 30,000 hours at 25 deg C, and 8 silicone rubber pads per fan keep vibration out of the case so noise stays at or below 29dBA at 1800RPM.
Daisy-Chain Wiring Between The Fans
The diagram shows the three fans linked in a daisy-chain from the motherboard. Fan power is DC 12V on a 4-pin PWM connector and the lighting is DC 5V on a 3-pin ARGB connector, so the board sets the speed and its lighting software drives the colour.
Daisy-Chain Wiring Between The Fans
The diagram shows the three fans linked in a daisy-chain from the motherboard. Fan power is DC 12V on a 4-pin PWM connector and the lighting is DC 5V on a 3-pin ARGB connector, so the board sets the speed and its lighting software drives the colour.
Pack Contents And Lighting Header
The pack holds three fans, each 120 x 120 x 25mm, the standard size for 120mm case and radiator mounts. The lighting plugs into a 5V 3-pin ARGB header and follows the motherboard's lighting software. It does not work on a 4-pin 12V RGB header.
Pack Contents And Lighting Header
The pack holds three fans, each 120 x 120 x 25mm, the standard size for 120mm case and radiator mounts. The lighting plugs into a 5V 3-pin ARGB header and follows the motherboard's lighting software. It does not work on a 4-pin 12V RGB header.
FAQ
Frequently Asked Questions
Everything you need to know about this product
Each fan moves up to 44.5CFM with 1.36mmH2O of air pressure at its top speed of 1800RPM. Three of them in the front of a case give a steady intake for the GPU and CPU cooler.
Antec rates them at 29dBA at the maximum 1800RPM. Under PWM control they slow to 800RPM at idle, and 8 silicone pads per fan stop vibration reaching the case.
Yes. Each fan has a 4-pin PWM connector, so the motherboard or a PWM fan hub adjusts the speed between 800 and 1800RPM based on temperature.
They push 1.36mmH2O of air pressure, which suits case intake and exhaust well. For a dense AIO radiator a fan with higher static pressure moves more air through the fins.
The lighting uses a standard 3-pin 5V ARGB connector, so it plugs into a 5V ARGB header and follows the motherboard's lighting software. It does not work on a 4-pin 12V RGB header.
The Vision 120 is a standard-blade fan: 800-1800RPM and 44.5CFM. The Vision 120R uses reverse blades so the clean side faces you when it pulls air in, and runs 800-1500RPM for 37.2CFM.
The pack holds three fans, each 120 x 120 x 25mm, the standard size for 120mm case and radiator mounts.
If your case has a glass panel and three 120mm front or top slots, the pack fills them with matching infinity mirror fans that run quiet at 29dBA and sync with your board's ARGB.
AI-Generated Content: These FAQs are generated by an automated AI system and may contain inaccuracies or omissions. Evetech makes no warranties, express or implied, regarding their completeness or reliability. For definitive information, please refer to the manufacturer's official specifications.
Please Note: Product images are for illustrative purposes only and may differ from the actual product.
Choose your
own PC
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderPrice Inc. Vat
R 399
Save R 100
ListR 499
399Change Quantity:
In Stock with Evetech
Choose your
own PC
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderAntec Vision 120 ARGB Fans 3-Pack
