Trusted Partners
The Antec C2M ARGB White is a Micro-ATX case in the Constellation series, finished white with 270-degree tempered glass. A 240mm ARGB reverse fan on the right side and a 120mm ARGB fan at the rear come installed. It takes graphics cards up to 415mm, CPU coolers up to 165mm and a 360mm radiator on top.
The Antec C2M ARGB White is a Micro-ATX case in the Constellation series, finished white with 270-degree tempered glass. A 240mm ARGB reverse fan on the right side and a 120mm ARGB fan at the rear come installed. It takes graphics cards up to 415mm, CPU coolers up to 165mm and a 360mm radiator on top.

Panoramic tempered glass shows the whole interior, which suits a white build with light-coloured parts and ARGB fans. The 4mm glass wraps 270 degrees with a clear, unobstructed view of the components. The case is white throughout, and Antec rates the glass at 4mm thick.

Panoramic tempered glass shows the whole interior, which suits a white build with light-coloured parts and ARGB fans. The 4mm glass wraps 270 degrees with a clear, unobstructed view of the components. The case is white throughout, and Antec rates the glass at 4mm thick.

A 240mm single-frame ARGB PWM reverse fan pulls air in from the right, and a single 120mm ARGB PWM fan exhausts at the rear. The case supports up to six 120mm fans in total if you want to add more.
A 240mm single-frame ARGB PWM reverse fan pulls air in from the right, and a single 120mm ARGB PWM fan exhausts at the rear. The case supports up to six 120mm fans in total if you want to add more.


Mesh panels on the top, bottom and side let air move in and out, while the PSU shroud grille adds vertical airflow. Dust filters on the top and bottom sit in the intake paths. The 240mm side fan and the 120mm rear fan are the two that come installed.

Mesh panels on the top, bottom and side let air move in and out, while the PSU shroud grille adds vertical airflow. Dust filters on the top and bottom sit in the intake paths. The 240mm side fan and the 120mm rear fan are the two that come installed.

The front, side and top panels come off by hand on fixing slots and studs, so the panels lift away without a screwdriver. Opening the case for cleaning, upgrades or cable work takes no tools. The fixing slots and studs hold each panel in position.
The front, side and top panels come off by hand on fixing slots and studs, so the panels lift away without a screwdriver. Opening the case for cleaning, upgrades or cable work takes no tools. The fixing slots and studs hold each panel in position.


Removable dust filters on the top and bottom prevent buildup and make cleaning quick and easy, with one pulling out from each of those two positions. The case also has mesh on the side, so air can enter while the filters stay in place.

Removable dust filters on the top and bottom prevent buildup and make cleaning quick and easy, with one pulling out from each of those two positions. The case also has mesh on the side, so air can enter while the filters stay in place.

The fan mounts accept 3x 120mm or 2x 140mm on top, 2x 120mm on the side and 1x 120mm at the rear. For radiators, the top takes 120, 240 or 360mm, the side 120 or 240mm and the rear 120mm.
The fan mounts accept 3x 120mm or 2x 140mm on top, 2x 120mm on the side and 1x 120mm at the rear. For radiators, the top takes 120, 240 or 360mm, the side 120 or 240mm and the rear 120mm.


Micro-ATX and Mini-ITX boards fit, with 5 expansion slots. Air coolers up to 165mm tall and power supplies up to 225mm long with the cables excluded fit, and graphics cards up to 415mm long. The case is 440 x 222 x 440mm, and the 240mm side radiator option limits card length to under 280mm.

Micro-ATX and Mini-ITX boards fit, with 5 expansion slots. Air coolers up to 165mm tall and power supplies up to 225mm long with the cables excluded fit, and graphics cards up to 415mm long. The case is 440 x 222 x 440mm, and the 240mm side radiator option limits card length to under 280mm.
Everything you need to know about this product
A 240mm single-frame ARGB PWM reverse fan on the right side and a 120mm ARGB PWM fan at the rear. The 240mm unit holds two fans in one frame, rated at 114.53CFM, 800-1500RPM and 30.4dB(A).
Graphics cards up to 415mm long fit. If you mount a 240mm radiator on the side, the limit drops to under 280mm.
Yes, on top. The side takes a 120mm or 240mm radiator and the rear takes a 120mm radiator.
Up to six 120mm fans: three on top, two on the side and one at the rear. The top also takes two 140mm fans.
Micro-ATX and Mini-ITX boards. It is a compact Micro-ATX case, so full-size ATX boards do not fit.
Air coolers up to 165mm tall and power supplies up to 225mm long with the cables excluded.
One USB Type-C 3.2 Gen 2 port at 10Gbps, one USB 3.0 port and a headphone/mic combo jack, plus the power button.
For a Micro-ATX gaming build, yes. It takes a 415mm graphics card and a 360mm AIO in a 440 x 222 x 440mm body, and the 240mm side intake fan and the rear fan come pre-installed.
AI-Generated Content: These FAQs are generated by an automated AI system and may contain inaccuracies or omissions. Evetech makes no warranties, express or implied, regarding their completeness or reliability. For definitive information, please refer to the manufacturer's official specifications.

























Please Note: Product images are for illustrative purposes only and may differ from the actual product.
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderHand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderAntec C2M ARGB Micro-ATX Case

























