Antec C7 ARGB Gaming Case - Black / Seamless Tempered Glass Front And Side / 360mm Radiator Support / USB-C Front Panel / E-ATX Motherboard Support / 415mm GPU Clearance / 4x ARGB PWM Fans Included / 0-761345-10135-6

The Antec C7 ARGB is a black E-ATX mid tower from the Constellation series, with a 4mm tempered glass side panel and a panoramic 270deg view into the build. It comes with 3 x 120mm ARGB PWM reverse fans on the right side and 1 x 140mm ARGB PWM fan at the rear, takes 360mm radiators on the top and side at the same time, and clears graphics cards up to 450mm. It measures 485 x 241 x 504mm (DWH).

Three 120mm ARGB PWM fans sit on the right side with reversed blades, and a 1 x 140mm ARGB PWM fan handles the rear. That is a complete airflow setup before you add anything, and the right side has room for 3 x 120mm fans in total. The front panel also carries an LED control button for the lighting.

Antec builds the C7 around bottom-to-top airflow and lists support for up to 10 fans. The top takes 3 x 120mm or 2 x 140mm, the side takes 3 x 120mm, the PSU shroud takes 3 x 120mm and the rear takes 1 x 120mm or 1 x 140mm. Fine mesh on the top and right panel and vents on the front, left and bottom of the lower chamber feed them.

The top and the side can each take a 360mm radiator at the same time. The top also accepts 120mm, 140mm, 240mm and 280mm radiators, the side accepts 120mm and 240mm, and the rear accepts 120mm and 140mm. For a side radiator, remove the small cover on the PSU shroud.

Antec lists no interference between a standard 52mm side radiator and an RTX 4090. Graphics cards up to 450mm long fit, and a side radiator can be up to 70mm thick overall. Once the overall AIO thickness passes 52mm, card length is limited to 280mm, so measure both before you buy.

The right flip door carries up to 2 x 3.5-inch HDD or 2.5-inch SSD and 2 x 2.5-inch SSD, and the tray in the case bottom takes another 3.5-inch HDD or 2.5-inch SSD. Across the whole case that adds up to 3 x 3.5-inch HDD or 5 x 2.5-inch SSD at most, depending on the motherboard form factor.

Cables run through 32mm of cable management space behind the motherboard tray, closed off by a removable flip-door cover. 2 straps on the back of the motherboard and 2 straps at the rear keep the loom tidy. The case also supports back-connect motherboards, so those cables plug in from behind.

The I/O panel has a power button, an LED control button, 1 Type-C 10Gbps port, 2 USB 3.0 ports and a headphone and mic combo jack. A rear-pull PSU mount with EVA cushion pads is also listed, for easier power supply installation.

The side panel is 4mm tempered glass. Magnetic filters cover the front and left, a full-size pull-out filter sits underneath, and the panels are screw-free with clip handles. Inside, E-ATX boards up to 272mm, ATX, M-ATX and ITX fit, with room for CPU coolers up to 180mm tall and power supplies up to 210mm long including cables.