antec-p7s-mid-tower-case-silver
Antec P7S Mid Tower Case - Silver / ATX, Micro-ATX, Mini-ITX Support / Brushed Front With Dual Side Mesh / Sound-Dampening Steel Side Panels / Supports Up to 9 Fans / 405mm GPU Clearance / 175mm CPU Cooler Clearance / 360mm Top Radiator Support / 4x PWM Fans Included / 0-761345-10258-2
2 Years Local Warranty
Model No : Antec 0-761345-10258-2
Price Inc. Vat
R 999
Save R 100
ListR 1,099
999Change Quantity:
In Stock with Evetech
Antec P7S Mid Tower Case - Silver | 4 PWM Fans
A Quiet ATX Mid Tower With Four Fans Installed
The Antec P7S is an ATX mid tower in brushed silver, built for low noise. Both steel side panels are lined with sound-dampening foam, four PWM fans come installed, and the top filter switches between mesh for airflow and a solid cover for quieter running. It still clears GPUs up to 405mm, CPU coolers up to 175mm and a 360mm radiator.
A Quiet ATX Mid Tower With Four Fans Installed
The Antec P7S is an ATX mid tower in brushed silver, built for low noise. Both steel side panels are lined with sound-dampening foam, four PWM fans come installed, and the top filter switches between mesh for airflow and a solid cover for quieter running. It still clears GPUs up to 405mm, CPU coolers up to 175mm and a 360mm radiator.
Brushed Silver Front With Mesh Down Both Sides
The front panel is brushed silver, with mesh strips down both edges that draw air in toward the fans behind it. The body is steel and plastic, and the case supports ATX, Micro-ATX and Mini-ITX motherboards. With no glass anywhere, the build stays out of sight and keeps a plain, office-friendly look.
Brushed Silver Front With Mesh Down Both Sides
The front panel is brushed silver, with mesh strips down both edges that draw air in toward the fans behind it. The body is steel and plastic, and the case supports ATX, Micro-ATX and Mini-ITX motherboards. With no glass anywhere, the build stays out of sight and keeps a plain, office-friendly look.
A Top Filter That Switches Between Two Modes
Fit the mesh filter on top for maximum airflow, or swap in the solid cover for Silent Mode and less noise. Both lift out for cleaning, and a second dust filter sits under the case. Antec does not publish a noise figure, so expect less fan noise escaping rather than a silent PC.
A Top Filter That Switches Between Two Modes
Fit the mesh filter on top for maximum airflow, or swap in the solid cover for Silent Mode and less noise. Both lift out for cleaning, and a second dust filter sits under the case. Antec does not publish a noise figure, so expect less fan noise escaping rather than a silent PC.
Sound-Dampening Foam On Both Steel Panels
Foam on both steel side panels cuts the noise that escapes the case, and neither panel has a window, so the interior is closed off. That suits a work or study PC that should stay out of the way, while the case still leaves room for a gaming graphics card.
Sound-Dampening Foam On Both Steel Panels
Foam on both steel side panels cuts the noise that escapes the case, and neither panel has a window, so the interior is closed off. That suits a work or study PC that should stay out of the way, while the case still leaves room for a gaming graphics card.
Four PWM Fans Connected In A Daisy Chain
Three 120mm PWM fans sit at the front and one 120mm PWM fan at the rear, connected in a daisy chain. The front mount can also take 2x 140mm fans, and the top accepts 3x 120mm or 2x 140mm if you want to add more airflow later.
Four PWM Fans Connected In A Daisy Chain
Three 120mm PWM fans sit at the front and one 120mm PWM fan at the rear, connected in a daisy chain. The front mount can also take 2x 140mm fans, and the top accepts 3x 120mm or 2x 140mm if you want to add more airflow later.
Reverse Fan Mounts Below The Graphics Card
The PSU shroud takes 2x 120mm fans, mounted in reverse about 30mm below the GPU so air goes straight at the graphics card. These two fans are not included, but the mounts are ready when you want them. Air reaches the card directly across that gap, and the front, top and rear mounts stay free for the other fans in the case.
Reverse Fan Mounts Below The Graphics Card
The PSU shroud takes 2x 120mm fans, mounted in reverse about 30mm below the GPU so air goes straight at the graphics card. These two fans are not included, but the mounts are ready when you want them. Air reaches the card directly across that gap, and the front, top and rear mounts stay free for the other fans in the case.
Radiator Room At The Top, Front And Rear
A 360mm radiator fits at the top, a 240mm radiator at the front and a 120mm radiator at the rear. The top takes 120, 240 or 360mm, and the front takes 120, 140 or 240mm. The rear radiator can be up to 160mm long.
Radiator Room At The Top, Front And Rear
A 360mm radiator fits at the top, a 240mm radiator at the front and a 120mm radiator at the rear. The top takes 120, 240 or 360mm, and the front takes 120, 140 or 240mm. The rear radiator can be up to 160mm long.
Room For Long Graphics Cards And Tall Coolers
Graphics cards up to 405mm long fit, and Antec lists RTX 50 series support. CPU air coolers up to 175mm tall fit as well, and power supplies up to 270mm long including cables. Seven expansion slots are reusable. That mix lets a gaming graphics card sit in a case designed to keep noise down.
Room For Long Graphics Cards And Tall Coolers
Graphics cards up to 405mm long fit, and Antec lists RTX 50 series support. CPU air coolers up to 175mm tall fit as well, and power supplies up to 270mm long including cables. Seven expansion slots are reusable. That mix lets a gaming graphics card sit in a case designed to keep noise down.
FAQ
Frequently Asked Questions
Everything you need to know about this product
Both steel side panels are lined with sound-dampening foam, and the top filter can be swapped for a solid cover in Silent Mode. Antec does not publish a noise figure, so expect less fan noise escaping rather than a silent PC.
Four 120mm PWM fans: three at the front and one at the rear, connected in a daisy chain. The PSU shroud has mounts for two more 120mm fans, which are not included.
The top takes a 120, 240 or 360mm radiator, the front takes a 120, 140 or 240mm radiator and the rear takes a 120mm radiator up to 160mm long.
Yes. Antec lists RTX 50 series support and room for cards up to 405mm long. CPU air coolers up to 175mm tall fit as well.
No. The P7S is a newer Antec model with a USB Type-C 10Gbps front port, four PWM fans, 405mm GPU clearance and a dual-mode top filter.
No. Both side panels are steel with sound-dampening foam, so the build is not on show from outside.
Power and reset buttons, two USB 3.0 ports, one USB Type-C 3.2 Gen 2 port at 10Gbps and a headphone/mic combo jack.
If you want a PC that stays out of the way, yes: foam-lined panels, a solid top cover option and four PWM fans keep noise down, while the 405mm GPU room still allows a gaming graphics card.
AI-Generated Content: These FAQs are generated by an automated AI system and may contain inaccuracies or omissions. Evetech makes no warranties, express or implied, regarding their completeness or reliability. For definitive information, please refer to the manufacturer's official specifications.
Please Note: Product images are for illustrative purposes only and may differ from the actual product.
Choose your
own PC
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderPrice Inc. Vat
R 999
Save R 100
ListR 1,099
999Change Quantity:
In Stock with Evetech
Choose your
own PC
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderAntec P7S Mid Tower Case
