antec-ultra-360-argb-aio-liquid-cooler-black
Antec Ultra 360 ARGB AIO Liquid CPU Cooler - Black / 360mm Radiator / 3x 120mm PWM ARGB Fans / Mirror Lighting Pump Head / 2600RPM 6-Pole Pump / IIR-EPDM Braided Tubing / Intel LGA 1851 1700 + AMD AM5 AM4 / 0-761345-40088-6
3 Years Local Warranty
Model No : Antec 0-761345-40088-6
Price Inc. Vat
R 899
Save R 100
ListR 999
899Change Quantity:
In Stock with Evetech
Antec Ultra 360 ARGB Liquid Cooler - Black
360mm AIO With Three ARGB Fans
The Antec Ultra 360 ARGB is a 360mm AIO liquid CPU cooler with three 120mm PWM ARGB fans and a mirror lighting pump head. A 6-pole low-noise pump runs at 2600RPM and 23dBA or less, and the fans run 800-1800RPM for up to 67.62CFM each. The fans and pump chain to one ARGB header, and it fits Intel LGA 1851 and 1700 and AMD AM5 and AM4.
360mm AIO With Three ARGB Fans
The Antec Ultra 360 ARGB is a 360mm AIO liquid CPU cooler with three 120mm PWM ARGB fans and a mirror lighting pump head. A 6-pole low-noise pump runs at 2600RPM and 23dBA or less, and the fans run 800-1800RPM for up to 67.62CFM each. The fans and pump chain to one ARGB header, and it fits Intel LGA 1851 and 1700 and AMD AM5 and AM4.
The Full Loop: Radiator, Fans, Pump
A 360mm radiator carries three 120mm ARGB fans, with two tubes running to a square pump head on the CPU. The loop is sealed, so there is nothing to fill or top up. Antec uses IIR-EPDM tubing with a braided layer to cut coolant permeation and evaporation over time.
The Full Loop: Radiator, Fans, Pump
A 360mm radiator carries three 120mm ARGB fans, with two tubes running to a square pump head on the CPU. The loop is sealed, so there is nothing to fill or top up. Antec uses IIR-EPDM tubing with a braided layer to cut coolant permeation and evaporation over time.
Mirror Lighting Pump Head At 2600RPM
The multi-layer mirror top of the pump head layers the ARGB lighting from several angles around the Antec logo. A 6-pole low-noise motor drives the pump at 2600RPM, which Antec rates at 23dBA or less with low vibration. The pump is rated for a 40,000-hour life and connects with a 3-pin plug.
Mirror Lighting Pump Head At 2600RPM
The multi-layer mirror top of the pump head layers the ARGB lighting from several angles around the Antec logo. A 6-pole low-noise motor drives the pump at 2600RPM, which Antec rates at 23dBA or less with low vibration. The pump is rated for a 40,000-hour life and connects with a 3-pin plug.
120mm PWM ARGB Fans, Up To 67.62CFM
The hydraulic-bearing fans move up to 67.62CFM with 2.09mmH2O of air pressure at 1800RPM, where noise reaches 33.05dBA. Under PWM control they slow towards 800RPM when the CPU is not working hard. Each frame is 120 x 120 x 25mm.
120mm PWM ARGB Fans, Up To 67.62CFM
The hydraulic-bearing fans move up to 67.62CFM with 2.09mmH2O of air pressure at 1800RPM, where noise reaches 33.05dBA. Under PWM control they slow towards 800RPM when the CPU is not working hard. Each frame is 120 x 120 x 25mm.
A 397mm Radiator With A 16mm Cooling Core
The aluminium radiator measures 397 x 120 x 27mm, with Antec's 16mm cooling core for balanced flow and even temperatures. The case needs a 360mm radiator mount, and the 25mm fans on top mean about 52mm of depth for radiator plus fans.
A 397mm Radiator With A 16mm Cooling Core
The aluminium radiator measures 397 x 120 x 27mm, with Antec's 16mm cooling core for balanced flow and even temperatures. The case needs a 360mm radiator mount, and the 25mm fans on top mean about 52mm of depth for radiator plus fans.
One PWM And One ARGB Connection
The three fans daisy-chain on a 7-pin PWM and ARGB cable that ends in a 4-pin PWM plug for the CPU fan header, so the board sets 800-1800RPM by temperature. The pump uses a 3-pin connector, and the lighting runs to one 5V 3-pin ARGB header. It does not work on a 12V 4-pin RGB header.
One PWM And One ARGB Connection
The three fans daisy-chain on a 7-pin PWM and ARGB cable that ends in a 4-pin PWM plug for the CPU fan header, so the board sets 800-1800RPM by temperature. The pump uses a 3-pin connector, and the lighting runs to one 5V 3-pin ARGB header. It does not work on a 12V 4-pin RGB header.
Braided IIR-EPDM Tubing Resists Kinks
The tubing is IIR-EPDM with a braided layer. The IIR layer cuts coolant permeation, and the EPDM layer with braiding resists ageing, kinks and cracks. The braid also gives the hoses a textured black finish, and the tubes run between the radiator and the pump head.
Braided IIR-EPDM Tubing Resists Kinks
The tubing is IIR-EPDM with a braided layer. The IIR layer cuts coolant permeation, and the EPDM layer with braiding resists ageing, kinks and cracks. The braid also gives the hoses a textured black finish, and the tubes run between the radiator and the pump head.
Intel And AMD Socket Support
The cooler fits Intel LGA 1851, 1700, 1200, 115X, 1366 and 20XX and AMD AM5 and AM4. The render shows the pump head on an Intel board and on an AMD board, so one cooler covers both platforms. Antec does not publish a TDP figure for it.
Intel And AMD Socket Support
The cooler fits Intel LGA 1851, 1700, 1200, 115X, 1366 and 20XX and AMD AM5 and AM4. The render shows the pump head on an Intel board and on an AMD board, so one cooler covers both platforms. Antec does not publish a TDP figure for it.
FAQ
Frequently Asked Questions
Everything you need to know about this product
Antec does not publish a TDP figure for it. It pairs a full 397mm-long 360mm radiator with a 2600RPM pump and three 120mm fans that move up to 67.62CFM each at 1800RPM.
The 6-pole pump is rated at 23dBA or less. The fans reach 33.05dBA at their full 1800RPM, and under PWM control they slow to around 800RPM when the CPU is not working hard.
Yes. The three fans daisy-chain on a 7-pin PWM and ARGB cable that ends in a 4-pin PWM plug for the CPU fan header, so the board sets 800-1800RPM by temperature. The pump uses a 3-pin connector.
No. It is a sealed loop, and Antec uses IIR-EPDM tubing with a braided layer to cut coolant permeation and evaporation over time.
Intel LGA 1851, 1700, 1200, 115X, 1366 and 20XX, and AMD AM5 and AM4.
The fans and the pump head daisy-chain into one cable for a 5V 3-pin ARGB header, so one header lights all of it and it follows your motherboard's lighting software. It does not work on a 12V 4-pin RGB header.
Your case needs a 360mm radiator mount. The radiator is 397 x 120 x 27mm and the 25mm fans sit on top, so allow about 52mm of depth for radiator plus fans.
If you want a 360mm AIO with three ARGB fans and a mirror pump head that wires up with one PWM and one ARGB connection, it covers a gaming build without extra hubs.
AI-Generated Content: These FAQs are generated by an automated AI system and may contain inaccuracies or omissions. Evetech makes no warranties, express or implied, regarding their completeness or reliability. For definitive information, please refer to the manufacturer's official specifications.
Please Note: Product images are for illustrative purposes only and may differ from the actual product.
Choose your
own PC
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderPrice Inc. Vat
R 899
Save R 100
ListR 999
899Change Quantity:
In Stock with Evetech
Choose your
own PC
Hand-pick every part with live stock, compatibility, and instant pricing.
Try the new builderAntec Ultra 360 ARGB AIO Liquid CPU Cooler
